Immersion chiller for cooling wort after boiling.

• Includes two 8 foot lengths of tubing, one with a female garden hose fitting.
• Fully assembled.
• 25 feet of 3/8" copper refrigeration tubing.
• Coil dimensions: 9.5" diameter x 7" tall.
• Overall height: 16"

Immersion chiller for cooling wort after boiling.

• Includes two 8 foot lengths of tubing, one with a female garden hose fitting.
• Fully assembled.
• 25 feet of 3/8" stainless steel tubing.
• Coil dimensions: 10" diameter x 8" tall.
• Overall height: 16"

Immersion chiller for cooling wort after boiling.

• Compression connectors connect directly to garden hose fittings.
• Fully assembled.
• 25 feet of 3/8" copper refrigeration tubing.
• Coil dimensions: 10" diameter x 8" tall.
• Overall height: 15"

Immersion chiller for cooling wort after boiling.

• Garden hose connections.
• Coil dimensions: 12.25" diameter x 10.5" tall.
• Overall height: 24"

Counterflow chiller for cooling wort after boiling.

• 25 feet of 3/8" copper refrigeration tubing jacketed by 5/8" garden hose.
• Can be gravity fed, but a pump is recommended.
• 13.5" diameter, 6" tall
• **CLEARANCE PRICED**

Designed to connect inline before a wort chiller.

• Submerse in ice after chilling as cold as possible with tap water.
• 12.5 feet of 3/8" copper refrigeration tubing. No connectors.
• Coil dimensions: 9" diameter x 2" tall.

Faucet adapter for wort chillers or bottle washers.

• Connects to most standard kitchen sinks.

For connecting a garden hose to 3/8" OD copper tubing.

• Typically used as the water inlet on a wort chiller.
• No soldering required.

For connecting a garden hose to 3/8" ID vinyl or silicone tubing.

• Typically used as the inlet for a wort chiller, with a short piece of vinyl or silicone tubing.

For connecting a garden hose to 1/2" ID vinyl or silicone tubing.

• Typically used as the inlet for a wort chiller, with a short piece of vinyl or silicone tubing.